On Sat, 04 Nov 2000 07:06:04 -0800, KB7WW Art Moe wrote:
>One of the sockets is not making good contact with the filament,
>both tubes will light in one socket but neither will light in the
>other. I have measured the voltage at the connection of the choke
>and the socket and have voltage there.
>
>Anyone have a cure for this???
Unless you can replace the contact in the socket, I'd recommend a installing
new socket.
--
FAQ on WWW: http://www.contesting.com/FAQ/amps
Submissions: amps@contesting.com
Administrative requests: amps-REQUEST@contesting.com
Problems: owner-amps@contesting.com
|