Rich says:
>At least two people have seen the 220's normal damped wave
>ringing at 110MHz on a spectrum analyzer.
How does one see that on a spectrum analyser? Because it's not a continuous
signal in the time domain, it's not the thing to look for with a spectrum
analyser.
Remember too, that a spectrum analyser, given half a chance, will lie like a
personnel manager!
73
Peter G3RZP
--
FAQ on WWW: http://www.contesting.com/FAQ/amps
Submissions: amps@contesting.com
Administrative requests: amps-REQUEST@contesting.com
Problems: owner-amps@contesting.com
|