See Figure 24 on my Web site. Several thousand gold meltballs are
visable in the foreground. The larger particles is sawing-residue from
removal of the anode. All of the meltballs apparently came from a single
gold blister on the lower half of the grid. Prior to autopsy, internal
leakage was 10uA at +4300v and c. 0uA with -6000v. .
later
- Rich..., 805.386.3734, www.vcnet.com/measures.
end
--
FAQ on WWW: http://www.contesting.com/FAQ/amps
Submissions: amps@contesting.com
Administrative requests: amps-REQUEST@contesting.com
Problems: owner-amps@contesting.com
|