>
>In a message dated 09/30/2000 06:38:38 AM Pacific Daylight Time,
>cqki8fh@juno.com writes:
>
><<
>
> I received a collins 30L-1. The ham who gave it to me said it had not
> been on in over 20 years. I replaced several parts (cap, rest, etc)
> including the 811A tubes. The key down on most of the bands is about 700
> watts or less.
The rated dissipation per 811A anode is 65w max. 811As tend to melt holes
in the anodes when keyed down If you don't have a free supply of new
tubes, it might be a good idea to tune with a tuning pulser.
cheers
> I was wondering it the transformer might be bad. The D.C
> volts is about 1800. Do any of you have and suggestions. I am driving
> this amp with 100 watts from a Kenwood ts-820.
>
> Thanks
>
> Dan
> ___________________________ >>
>sounds like its working too me! collins calls for 70 watts drive hank
>
good point.
- Rich..., 805.386.3734, www.vcnet.com/measures.
end
--
FAQ on WWW: http://www.contesting.com/FAQ/amps
Submissions: amps@contesting.com
Administrative requests: amps-REQUEST@contesting.com
Problems: owner-amps@contesting.com
|