The Harvey Wells Bandmaster used an 807 (or a 1625 - memory fails me) on
144 MHz. This was back in the 50's. I beleive that the rig used the 1625 as
a tripler.
Not germain to the subject, but it does show what can be done. The rig
covered 50 MHz (Mc back then) too.
73, Harry, W3IIT
At 11:38 AM 09/27/2000 -0500, Spencer Petri wrote:
>
>> Pete says:
>>
>> >Not so, a push-pull pair will make a good amp on six meters.
>>
>> you surprise me. Surely wouldn't be my first choice - or second.....even
>though
>> they're rated to 60MHz at full input. So, for that matter, are 807s. Are
>they
>> stable enough in linear service not to have poor IMD, though?
>
>Check out 73 magazine, July 1970. K1CLL built an amp using 811As in
>push-pull. I actually duplicated the amp and it worked as stated. He claimed
>400 watts out on CW. I didn't have a wattmeter at the time but it was a
>barn-burner.
>
>807s. In the old days I've see low-band radios that used the 807 up to 40
>mHz or so on FM.
>
>
>es 73 de Pete WA5JCI EM21
>
>6 meter VUCC # 361/658-WAS # 490-WAC CW
>2 meter VUCC # 346/190
>
>
>
>
>--
>FAQ on WWW: http://www.contesting.com/FAQ/amps
>Submissions: amps@contesting.com
>Administrative requests: amps-REQUEST@contesting.com
>Problems: owner-amps@contesting.com
>
>
>
Microwave Update/Hamarama 2000
September 28, 29, 30/October 1, 2000
PHILADELPHIA, PA.
FOR INFORMATION VISIT
http://www.ij.net/packrats/MUD_2000/mud.html
--
FAQ on WWW: http://www.contesting.com/FAQ/amps
Submissions: amps@contesting.com
Administrative requests: amps-REQUEST@contesting.com
Problems: owner-amps@contesting.com
|