>
>I have seen several postings with the subject "8877 test results"- but no
>results.
Positive leakage was 10uA at 4000v. Negative leakage was 0uA at 6000v.
This is typical of gold sputtering. Autopsy revealed one gold blister on
the lower part of the grid. There were no bare patches of base metal on
the grid. Most of the meltballs apparently landed on the anode
insulator.
>
>Have I missed one? and- are there "autopsy" results, too?
>
cheers, Bill
- Rich..., 805.386.3734, www.vcnet.com/measures.
end
--
FAQ on WWW: http://www.contesting.com/FAQ/amps
Submissions: amps@contesting.com
Administrative requests: amps-REQUEST@contesting.com
Problems: owner-amps@contesting.com
|