I gave up on trying to find one. A hot air paint stripping gun works better to
get the PL259 body up to temp very quickly;after that, a 40 watt Weller TCP with
a number 8 bit works fine - that's on RG8 size cable, too.
I also recommend a cheap tubing cutter to cut the tinned braid exactly to
length.
Just remember to put the sleeve on the cable first!!
73
Peter G3RZP
--
FAQ on WWW: http://www.contesting.com/FAQ/amps
Submissions: amps@contesting.com
Administrative requests: amps-REQUEST@contesting.com
Problems: owner-amps@contesting.com
|