Amps
[Top] [All Lists]

[AMPS] Ameritron AL-1500

To: <amps@contesting.com>
Subject: [AMPS] Ameritron AL-1500
From: w7ry@netzero.net (w7ry)
Date: Sat, 26 Aug 2000 22:35:25 -0700
This is a multi-part message in MIME format.

------=_NextPart_000_0015_01C00FAD.EDCD7DC0
Content-Type: text/plain;
        charset="iso-8859-1"
Content-Transfer-Encoding: quoted-printable

Well the amp is fixed.=20
The resistors were all ok. The Schematic is wrong. There is only 1ea. =
1.5 Ohm resistor. The diode that is installed on the B- rail to ground =
was dead shorted.=20

That is what was causing the meters to not read correctly.

The step start resistor was blown to bits as well.=20

Glad that the internal fuse in the 8877 blew instead of some expensive =
diodes or resistors !


73 to all and thanks for the information.


Jim W7RY

    -----Original Message-----
    From: w7ry <w7ry@netzero.net>
    To: amps@contesting.com <amps@contesting.com>
To: <amps@contesting.com>
    Date: Saturday, August 26, 2000 4:07 PM
    Subject: [AMPS] Ameritron AL-1500
   =20
   =20
    Hello to the group.
    =20
    I have an Ameritron AL-1500 serial  number 882. The tube is =
defective. It has a date code of 9218
    =20
    I have also noticed that there is a resistor missing on the metering =
board. The schematic calls for 2 ea. 1.5 Ohm resistors for R-3 & 4. In =
this amp, there is only one resistor. Which is correct ? The amp with 1 =
resistor or the schematic ?
    =20
    Thanks and 73
    Jim W7RY
    =20

------=_NextPart_000_0015_01C00FAD.EDCD7DC0
Content-Type: text/html;
        charset="iso-8859-1"
Content-Transfer-Encoding: quoted-printable

<!DOCTYPE HTML PUBLIC "-//W3C//DTD W3 HTML//EN">
<HTML>
<HEAD>

<META content=3Dtext/html;charset=3Diso-8859-1 =
http-equiv=3DContent-Type><!DOCTYPE HTML PUBLIC "-//W3C//DTD W3 =
HTML//EN">
<META content=3D'"MSHTML 4.72.3110.7"' name=3DGENERATOR>
</HEAD>
<BODY bgColor=3D#ffffff>
<DIV><FONT color=3D#000000 size=3D2>Well the amp is fixed. </FONT></DIV>
<DIV><FONT color=3D#000000 size=3D2></FONT><FONT size=3D2>The resistors =
were all ok.=20
The Schematic is wrong. There is only 1ea. 1.5 Ohm resistor. The diode =
that is=20
installed on the B- rail to ground was dead shorted. </FONT></DIV>
<DIV><FONT size=3D2></FONT>&nbsp;</DIV>
<DIV><FONT size=3D2>That is what was causing the meters to not read=20
correctly.</FONT></DIV>
<DIV><FONT size=3D2></FONT>&nbsp;</DIV>
<DIV><FONT size=3D2>The step start resistor was blown to bits as well.=20
</FONT></DIV>
<DIV><FONT size=3D2></FONT>&nbsp;</DIV>
<DIV><FONT size=3D2>Glad that the internal fuse in the 8877 blew instead =
of some=20
expensive diodes or resistors !</FONT></DIV>
<DIV><FONT color=3D#000000 size=3D2></FONT>&nbsp;</DIV>
<DIV><FONT color=3D#000000 size=3D2></FONT>&nbsp;</DIV>
<DIV><FONT color=3D#000000 size=3D2>73 to all and thanks for the=20
information.</FONT></DIV>
<DIV>&nbsp;</DIV>
<DIV>&nbsp;</DIV>
<DIV><FONT color=3D#000000 size=3D2>Jim W7RY</FONT></DIV>
<DIV><FONT color=3D#000000 size=3D2></FONT>&nbsp;</DIV>
<BLOCKQUOTE=20
style=3D"BORDER-LEFT: #000000 solid 2px; MARGIN-LEFT: 5px; PADDING-LEFT: =
5px">
    <DIV><FONT face=3DArial size=3D2><B>-----Original =
Message-----</B><BR><B>From:=20
    </B>w7ry &lt;<A=20
    href=3D"mailto:w7ry@netzero.net";>w7ry@netzero.net</A>&gt;<BR><B>To: =
</B><A=20
    href=3D"mailto:amps@contesting.com";>amps@contesting.com</A> &lt;<A=20
    =
href=3D"mailto:amps@contesting.com";>amps@contesting.com</A>&gt;<BR><B>Dat=
e:=20
    </B>Saturday, August 26, 2000 4:07 PM<BR><B>Subject: </B>[AMPS] =
Ameritron=20
    AL-1500<BR><BR></DIV></FONT>
    <DIV><FONT color=3D#000000 size=3D2>Hello to the group.</FONT></DIV>
    <DIV><FONT color=3D#000000 size=3D2></FONT>&nbsp;</DIV>
    <DIV><FONT color=3D#000000 size=3D2>I have an Ameritron AL-1500 =
serial&nbsp;=20
    number 882. The tube is defective. It has a date code of =
9218</FONT></DIV>
    <DIV><FONT color=3D#000000 size=3D2></FONT>&nbsp;</DIV>
    <DIV><FONT color=3D#000000 size=3D2>I have also noticed that there =
is a resistor=20
    missing on the metering board. The schematic calls for 2 ea. 1.5 Ohm =

    resistors for R-3 &amp; 4. In this amp, there is only one resistor. =
Which is=20
    correct ? The amp with 1 resistor or the schematic ?</FONT></DIV>
    <DIV><FONT color=3D#000000 size=3D2></FONT>&nbsp;</DIV>
    <DIV><FONT color=3D#000000 size=3D2>Thanks and 73</FONT></DIV>
    <DIV><FONT color=3D#000000 size=3D2>Jim W7RY</FONT></DIV>
    <DIV><FONT color=3D#000000 =
size=3D2></FONT>&nbsp;</DIV></BLOCKQUOTE></BODY></HTML>

------=_NextPart_000_0015_01C00FAD.EDCD7DC0--


_____NetZero Free Internet Access and Email______
   http://www.netzero.net/download/index.html

--
FAQ on WWW:               http://www.contesting.com/FAQ/amps
Submissions:              amps@contesting.com
Administrative requests:  amps-REQUEST@contesting.com
Problems:                 owner-amps@contesting.com


<Prev in Thread] Current Thread [Next in Thread>