Amps
[Top] [All Lists]

[AMPS] Suppressors, measurements, and acrimonious blather

To: <amps@contesting.com>
Subject: [AMPS] Suppressors, measurements, and acrimonious blather
From: Peter_Chadwick@mitel.com (Peter Chadwick)
Date: Thu, 3 Aug 2000 13:47:08 +0100
Paul says:

>the standard use of the classic coiled wire on a carbon composition resistor.

I have a nasty suspicion that one of the problems  with the classic suppressor
is that the carbon comp resistor is pushed pretty hard in terms of dissipation,
especially on the higher bands, by the fundamental current. Add to that fact
that the resistor is in a high temperature environment as well, all of which
isn't good for reliability. The result is that the resistor value goes high, and
a suppressor that worked becomes a suppressor that doesn't work anymore.

73

Peter G3RZP



--
FAQ on WWW:               http://www.contesting.com/FAQ/amps
Submissions:              amps@contesting.com
Administrative requests:  amps-REQUEST@contesting.com
Problems:                 owner-amps@contesting.com


<Prev in Thread] Current Thread [Next in Thread>