This is a multi-part message in MIME format.
------=_NextPart_000_0066_01BFBFDC.B51C3BE0
Content-Type: text/plain;
charset="iso-8859-1"
Content-Transfer-Encoding: quoted-printable
paul
your right it could be, but i check that with my meter which is a =
fluke 8700 and it seems to be ok, their is one thing that seems out of =
line is the plate voltage when in stand by is going up over 3500 volts =
according to the meter on the amp, i would like to know if thats normal =
or if their is a problem there,under load it drops back down to about =
3200.
the reason i ask is i have had two different flash overs in the amp in =
the b+. the surge ris flashed and the rf choke flashed. then i can take =
the tube out and it will be ok. and it has happend with it setting their =
on a dummy load. paul you can check everthing else and it seems to be =
ok. the amp works great when its working.
------=_NextPart_000_0066_01BFBFDC.B51C3BE0
Content-Type: text/html;
charset="iso-8859-1"
Content-Transfer-Encoding: quoted-printable
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
<HTML><HEAD>
<META content=3D"text/html; charset=3Diso-8859-1" =
http-equiv=3DContent-Type>
<META content=3D"MSHTML 5.00.2919.6307" name=3DGENERATOR>
<STYLE></STYLE>
</HEAD>
<BODY bgColor=3D#ffffff>
<DIV><FONT size=3D2>paul</FONT></DIV>
<DIV><FONT size=3D2> your right it could be, but i check =
that with my=20
meter which is a fluke 8700 and it seems to be ok, their is one thing =
that seems=20
out of line is the plate voltage when in stand by is going up over 3500 =
volts=20
according to the meter on the amp, i would like to know if thats =
normal or=20
if their is a problem there,under load it drops back down to about=20
3200.</FONT></DIV>
<DIV><FONT size=3D2>the reason i ask is i have had two different flash =
overs in=20
the amp in the b+. the surge ris flashed and the rf choke flashed. then =
i can=20
take the tube out and it will be ok. and it has happend with it setting =
their on=20
a dummy load. paul you can check everthing else and it seems to be ok. =
the amp=20
works great when its working.</FONT></DIV></BODY></HTML>
------=_NextPart_000_0066_01BFBFDC.B51C3BE0--
--
FAQ on WWW: http://www.contesting.com/ampsfaq.html
Submissions: amps@contesting.com
Administrative requests: amps-REQUEST@contesting.com
Problems: owner-amps@contesting.com
Search: http://www.contesting.com/km9p/search.htm
|