SELL:* 2 pole 11 position high quality porcelain band switch rated at
5-6KW. Front panel mounting standoffs with rear support bracket.
*High voltage plate choke wound on 1" solid porcelain rod w/ 5" of
closewound #20 enameled wire. Overall length 6" with both ends tapped for
horizontal/vertical mounting
*Two coils to accommodate 10-160m. 10-40m coil is 6 turns of 1/4"
silvered tubing 2-1/2" wide and 3" long. 80-160m coil is a B&W 3"x5" #10
with a plastic sheet fitted to the inside to assist mounting.
*three (3) zener diodes 12VDC@10W. $105 shipped for the package
Heavy wall teflon chimney for the Eimac 8877 $30 shipped
6.0VAC@25 amp+ filament transformer with dual 110 primaries.
Specifically wound for the Eimac 3CX1200D7 but will accommodate the
4CX1000/1500 and replace the filament xmfr in the Collins 30S1. $75+
shipping
http://homestead.juno.com/w2cqm/files/RFDeckcomponents4.jpg
Ron W2CQM New York City
--
FAQ on WWW: http://www.contesting.com/ampsfaq.html
Submissions: amps@contesting.com
Administrative requests: amps-REQUEST@contesting.com
Problems: owner-amps@contesting.com
Search: http://www.contesting.com/km9p/search.htm
| 