Amps
[Top] [All Lists]
<prev [Date] next>
[Advanced]
 <prev [Thread] next>

[AMPS] filament repairs

from [Steve Thompson] [Permanent Link][Original]
To: <amps@contesting.com>
Subject: [AMPS] filament repairs
From: rfamps@ic24.net (Steve Thompson)
Date: Fri, 7 Apr 2000 14:21:58 -0700 
I have a directly heated tube (QY4-400) where the filament has gone o/c. If
I tap the anode, or use the hi-pot on the filament, it makes contact again.
I don't know the filament arrangement internally - I'm guessing that it's
linear wires.

Is there a way of repairing it?

Steve


--
FAQ on WWW:               http://www.contesting.com/ampsfaq.html
Submissions:              amps@contesting.com
Administrative requests:  amps-REQUEST@contesting.com
Problems:                 owner-amps@contesting.com
Search:                   http://www.contesting.com/km9p/search.htm
[More with this subject...]
<Prev in Thread] Current Thread [Next in Thread>
  • [AMPS] filament repairs, Steve Thompson <=
Previous by Date:  [AMPS] New amp. on the block, Phil Levin W2GE
Next by Date:  [AMPS] trade, Larry L. Ravlin
Previous by Thread:  [AMPS] New amp. on the block, Phil Levin W2GE
Next by Thread:  [AMPS] trade, Larry L. Ravlin
Indexes:  [Date] [Thread] [Top] [All Lists]