This is a multi-part message in MIME format.
------=_NextPart_000_00F0_01BF9E3A.623E3900
Content-Type: text/plain;
charset="iso-8859-2"
Content-Transfer-Encoding: quoted-printable
I just received a manual on the R.F. Communications (Harris) RF-110A =
amp.
that I am putting on the air. In the RF-124 power supply, I see =
something
that I have never seen before. Coming out of the full-wave diode bridge,
we first have a 2 Hy filter choke. Then, next in line is a .35 to 45 Hy =
swinging
choke, then a 25 mfd filter cap., and a 50k ohm bleeder resistor. I =
have never
seen a swinging choke wired AFTER a filter choke in a P.S. circuit =
before, nor
have I seen such a high value filter cap in a choke input power supply. =
A note
in the manual says the swinging choke improves the power supply voltage
regulation over the current range. The RF-110A has to be the most =
over-engineered
piece of equipment I have ever seen! In talks with some former Harris =
engineers,
it was designed for 100% duty cycle all-mode operation; especially RTTY. =
The
Mil-Spec also required -60 db IMD. The RF-124 power supply weighs 200 =
pounds!
The RF-110A is a 1 KW no-tune, 2-30 Mhz amp with 26 db gain.
(((73)))
Phil, K5PC
------=_NextPart_000_00F0_01BF9E3A.623E3900
Content-Type: text/html;
charset="iso-8859-2"
Content-Transfer-Encoding: quoted-printable
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
<HTML><HEAD>
<META content=3D"text/html; charset=3Diso-8859-2" =
http-equiv=3DContent-Type><BASE=20
href=3D"file://C:\Program Files\Common Files\Microsoft =
Shared\Stationery\">
<STYLE>BODY {
BACKGROUND-POSITION: left top; BACKGROUND-REPEAT: no-repeat; COLOR: =
#000000; FONT-FAMILY: Comic Sans MS; FONT-SIZE: 10pt
}
</STYLE>
<META content=3D"MSHTML 5.00.2722.2800" name=3DGENERATOR></HEAD>
<BODY bgColor=3D#ffffff>
<DIV><FONT face=3D"Slashed Zero Arial">I just received a manual on the =
R.F.=20
Communications (Harris) RF-110A amp.</FONT></DIV>
<DIV><FONT face=3D"Slashed Zero Arial">that I am putting on the air. In =
the RF-124=20
power supply, I see something</FONT></DIV>
<DIV><FONT face=3D"Slashed Zero Arial">that I have never seen before. =
Coming out=20
of the full-wave diode bridge,</FONT></DIV>
<DIV><FONT face=3D"Slashed Zero Arial">we first have a 2 Hy filter =
choke. Then,=20
next in line is a .35 to 45 Hy swinging</FONT></DIV>
<DIV><FONT face=3D"Slashed Zero Arial">choke, then a 25 mfd filter cap., =
and =20
a 50k ohm bleeder resistor. I have never</FONT></DIV>
<DIV><FONT face=3D"Slashed Zero Arial">seen a swinging choke wired AFTER =
a filter=20
choke in a P.S. circuit before, nor</FONT></DIV>
<DIV><FONT face=3D"Slashed Zero Arial">have I seen such a high value =
filter cap in=20
a choke input power supply. A note</FONT></DIV>
<DIV><FONT face=3D"Slashed Zero Arial">in the manual says the swinging =
choke=20
improves the power supply voltage</FONT></DIV>
<DIV><FONT face=3D"Slashed Zero Arial">regulation over the current =
range. The=20
RF-110A has to be the most over-engineered</FONT></DIV>
<DIV><FONT face=3D"Slashed Zero Arial">piece of equipment I have ever =
seen! In=20
talks with some former Harris engineers,</FONT></DIV>
<DIV><FONT face=3D"Slashed Zero Arial">it was designed for 100% duty =
cycle=20
all-mode operation; especially RTTY. The</FONT></DIV>
<DIV><FONT face=3D"Slashed Zero Arial">Mil-Spec also required -60 db =
IMD. The=20
RF-124 power supply weighs 200 pounds!</FONT></DIV>
<DIV>The RF-110A is a 1 KW no-tune, 2-30 Mhz amp with 26 db gain.</DIV>
<DIV> </DIV>
<DIV>(((73)))</DIV>
<DIV>Phil, K5PC</DIV>
<DIV> </DIV>
<DIV> </DIV>
<DIV> </DIV>
<DIV> </DIV></BODY></HTML>
------=_NextPart_000_00F0_01BF9E3A.623E3900--
--
FAQ on WWW: http://www.contesting.com/ampsfaq.html
Submissions: amps@contesting.com
Administrative requests: amps-REQUEST@contesting.com
Problems: owner-amps@contesting.com
Search: http://www.contesting.com/km9p/search.htm
|