Amps
[Top] [All Lists]

[AMPS] Re: Variable Screen Voltage!

To: <amps@contesting.com>
Subject: [AMPS] Re: Variable Screen Voltage!
From: 2@vc.net (measures)
Date: Thu, 16 Mar 2000 09:14:37 -0700
>Colin says:
>
>>Any comments about whether this would work.  Since the manufacturer does
>not
>>provide data for this operation, should it not be done.  Is this the 300
>mpg
>>carb that Rich says is impossible?  Since the screen was varied at one
>>point, is it incapable of working? 
>
>If you go back to my favourite work (Pappenfus et al) he goes into this into
>some detail. He says 'tetrode tubes can be used in cathode-driven
>amplifiers. The power gain is considerably higher (than zero bias triodes)
>and is in 20 to 50 region.'

The 30S-1 uses a cathode driven tetrode.   power gain is about 11.  


-  Rich..., 805.386.3734, www.vcnet.com/measures.  
end


--
FAQ on WWW:               http://www.contesting.com/ampsfaq.html
Submissions:              amps@contesting.com
Administrative requests:  amps-REQUEST@contesting.com
Problems:                 owner-amps@contesting.com
Search:                   http://www.contesting.com/km9p/search.htm


<Prev in Thread] Current Thread [Next in Thread>