Amps
[Top] [All Lists]

[AMPS] Static discharge caused arcs

To: <amps@contesting.com>
Subject: [AMPS] Static discharge caused arcs
From: k7fm@teleport.com (Lamb)
Date: Fri, 10 Mar 2000 06:45:28 -0800
There may be a difference between the tv set, vcr and other devices.  If the
static discharge has the "appearance" of rf, then, after arriving at the
coax connector, it will immediately go through a voltage step up in the
pi-network.  If the impedance transformation of the pi-network is 2500 ohms
to 50 ohms, then a voltage step up occurs.  Tough to do this stuff mentally,
but I think this is a voltage step up of 8:1.

Not saying this happens - but it might - even without the power to blow
relays off the chassis (direct hit).


--
FAQ on WWW:               http://www.contesting.com/ampsfaq.html
Submissions:              amps@contesting.com
Administrative requests:  amps-REQUEST@contesting.com
Problems:                 owner-amps@contesting.com
Search:                   http://www.contesting.com/km9p/search.htm


<Prev in Thread] Current Thread [Next in Thread>