Thanks to all who sent and/or offered the SB-200 schematic. The response was
overwhelming, so please accept my thanks here. It was a busy week at work, so
I am just now getting caught up on email.
I found the 2uF and 20uF caps in the relay/bias -120v circuit to be leaky. I
replaced them and now i am getting good readings from the filament
transformer. I am also now able to derive the 4vDC rectified from one side of
the filament transformer to feed the Harbach soft-key module. Now to replace
the hex-fet damaged by the leaky caps in the -120v supply!
73 all.
(PS. Can someone recommend a good software program to develop web pages with
multiple pictures, which can be clicked-on to give a full-page picture ?
The reason I ask is that I have taken a rather large catalog of nice jpegs of
the various amps I have either owned, modified, or worked on, and figured I'd
make them available for viewing via my web page.)
--
FAQ on WWW: http://www.contesting.com/ampsfaq.html
Submissions: amps@contesting.com
Administrative requests: amps-REQUEST@contesting.com
Problems: owner-amps@contesting.com
Search: http://www.contesting.com/km9p/search.htm
|