Amps
[Top] [All Lists]

[AMPS] 8877 amp failure

To: <amps@contesting.com>
Subject: [AMPS] 8877 amp failure
From: measures@vcnet.com (measures)
Date: Mon, 3 Jan 2000 17:31:35 -0700
>
>> The original problem was that the HV took a short cut thru the side of a
>> Millen HV connector to the chassis.  My B+ surge resistor did it's job but
>> lost it's life in the process.  Apparently, this is when the zener went 
also.
>
>There are two types of Millen HV connector users when dealing with < 2500v

--
FAQ on WWW:               http://www.contesting.com/ampsfaq.html
Submissions:              amps@contesting.com
Administrative requests:  amps-REQUEST@contesting.com
Problems:                 owner-amps@contesting.com
Search:                   http://www.contesting.com/km9p/search.htm


<Prev in Thread] Current Thread [Next in Thread>