I ran my SB200 on 120v for several years with little trouble. It easily
put out 500w on 10m. It's on 240v now, and will likely stay there, but I
expect that you would probably have no problems.
--Mark (WM7D)
On Wed, 10 Nov 1999, Jim Price N3QYE wrote:
>
> Thanks for the many helpful replies I've received. BTW the 208v is
> indeed 3 phase, installed years ago for a window air conditioner here at
> NCSU. Moving the university physical plant to change it would be more
> difficult than moving a mountain.
>
> For those of you who run the SB200 on 120v, what performance can I
> expect if we change the rig to run on 120v, compared to running it on
> 240V? Is the changeover worth the trouble?
>
> 73
>
> Jim N3QYE
> W4ATC - NCSU Student ARS
>
> --
> FAQ on WWW: http://www.contesting.com/ampsfaq.html
> Submissions: amps@contesting.com
> Administrative requests: amps-REQUEST@contesting.com
> Problems: owner-amps@contesting.com
> Search: http://www.contesting.com/km9p/search.htm
>
--
FAQ on WWW: http://www.contesting.com/ampsfaq.html
Submissions: amps@contesting.com
Administrative requests: amps-REQUEST@contesting.com
Problems: owner-amps@contesting.com
Search: http://www.contesting.com/km9p/search.htm
|