Amps
[Top] [All Lists]

[AMPS] RE:

To: <amps@contesting.com>
Subject: [AMPS] RE:
From: RFpower@radiodan.com (Radiodan W7RF)
Date: Sun, 31 Oct 1999 17:59:13 -0800
Hi Rich,

I haven't actually tried the faster speeds to see what differences there
would be in the final outcome. I usually just leave the keyer where it was
last.

This would be a good test to try to see if there are any end result
differences (power out and where the tune/load end up) with different dit
speeds.

And they say CW is an outdated mode!

73, Dan Magro W7RF, (President WARC 1999, member SCDXC, SCCC)
Manufacturers Rep & Distributor for HENRY RF Power Amplifiers.
RF Applications Power Measuring equipment, See the VFD & WinWatt!
www.radiodan.com <http://www.radiodan.com>     RFpower@radiodan.com
<mailto:RFpower@radiodan.com> A trip to our web site is worth the click!




> -----Original Message-----
> From: owner-amps@contesting.com [mailto:owner-amps@contesting.com]On
> Behalf Of measures
> Sent: Sunday, October 31, 1999 2:40 PM
> To: AMPS
> Subject: Re: [AMPS] RE:
>
>
>
> >
> >Hi Ron,
> >
> >Don't bother with these devices, just use your keyer that is
> already hooked
> >up for CW use.
> >Set it for a 35 WPM string of ditz and tune up.
>
> 35wpm dits are too slow to dampen ordinary meters.  50wpm - 55wpm is
> usally fast enough.  With some radios, 60wpm does not allow full pep to
> reached before the dit ends. .
>
>
> -  Rich..., 805.386.3734, www.vcnet.com/measures.
>
>
> --
> FAQ on WWW:               http://www.contesting.com/ampsfaq.html
> Submissions:              amps@contesting.com
> Administrative requests:  amps-REQUEST@contesting.com
> Problems:                 owner-amps@contesting.com
> Search:                   http://www.contesting.com/km9p/search.htm
>
>


--
FAQ on WWW:               http://www.contesting.com/ampsfaq.html
Submissions:              amps@contesting.com
Administrative requests:  amps-REQUEST@contesting.com
Problems:                 owner-amps@contesting.com
Search:                   http://www.contesting.com/km9p/search.htm


<Prev in Thread] Current Thread [Next in Thread>