Millen is alive and well in Mass.
I order all my connectors direct.
To ad to Rich's statement, the yellow connectors are
less working voltage than are the red and black because
they are made of different material.
Rich has good intentions when recommending vendors,
but many of them are not set up for ham use in small
quantities. The Millen connectors are fine and inexpensive
if a few precautions are taken.
I use them exclusively here with great success.
If I have a situation where the voltage will exceed
2000 volts, I drill an over-sized hole in the chassis and use
a plexiglass or Teflon sheet between the chassis and the connector.
Works good...lasts a long time!
(((73)))
Phil, K5PC
----- Original Message -----
From: measures <measures@vcnet.com>
To: Dick McDuffie <ny1e@server.nlbbs.com>; AMPS <amps@contesting.com>
Sent: Friday, September 24, 1999 7:19 AM
Subject: Re: [AMPS] need Millen HV connector
>
> >
> >Are Millen HV connectors still availible? I sent a check to KM1H in May for
> >a pair and am still waiting!
>
> There appears to be a serious problem with Carl. . // HV connectors:
> Alden Products in Brocton, Ma. Ask for a catalog at 508-583-0160.
>
> >The check was cashed. Anyone else have one
> >laying around? I just need the chassis part if you don't have the pair.
> >Thanks, Dick NY1E
> >
> Millen "HV" connectors are made from hygroscopic material.
>
>
> - Rich..., 805.386.3734, www.vcnet.com/measures.
>
>
> --
> FAQ on WWW: http://www.contesting.com/ampsfaq.html
> Submissions: amps@contesting.com
> Administrative requests: amps-REQUEST@contesting.com
> Problems: owner-amps@contesting.com
> Search: http://www.contesting.com/km9p/search.htm
>
>
--
FAQ on WWW: http://www.contesting.com/ampsfaq.html
Submissions: amps@contesting.com
Administrative requests: amps-REQUEST@contesting.com
Problems: owner-amps@contesting.com
Search: http://www.contesting.com/km9p/search.htm
|