[This is a one-time announcement.]
The Triode Board is a new solution to the control and protection of
triode power amplifiers. It follows the same successful formula as
G3SEK's Tetrode Boards: all the necessary control, protection and
metering circuits on a ready-made PC board, along with a comprehensive
User Manual and on-line support.
The Triode Board is configurable to use with almost any amateur-size
grounded-grid amplifier, and has been tested on a wide range of triodes.
More details on the web site!
The kit includes a double-sided PC board with printed component
locations, all the components for the PC board and the 38-page User
Manual. Experienced constructors can buy the bare board and the User
Manual, which includes a complete parts list.
For details of the Triode Board and Tetrode Boards, visit
http://www.ifwtech.demon.co.uk/g3sek
Triode Boards are available NOW from G3SEK.
In the USA, Triode Boards and kits will be available in mid-October
from Down East Microwave, Inc at (908) 996-3584.
73 from Ian G3SEK Editor, 'The VHF/UHF DX Book'
'In Practice' columnist for RadCom (RSGB)
http://www.ifwtech.demon.co.uk/g3sek
--
FAQ on WWW: http://www.contesting.com/ampsfaq.html
Submissions: amps@contesting.com
Administrative requests: amps-REQUEST@contesting.com
Problems: owner-amps@contesting.com
Search: http://www.contesting.com/km9p/search.htm
|