[AMPS] Upside down SB-220

[measures@vcnet.com (measures)]

>
>Is there anything wrong with operating an SB-220 upside down while (I hope
>briefly) trouble-shooting a problem under the chassis?  I would not be
>drawing more than idling cathode current, but am concerned about the
>filaments of the 3-500s.

The Eimac spec sheet says base up or base down, Pete.  


-  Rich..., 805.386.3734, www.vcnet.com/measures.  


--
FAQ on WWW:               http://www.contesting.com/ampsfaq.html
Submissions:              amps@contesting.com
Administrative requests:  amps-REQUEST@contesting.com
Problems:                 owner-amps@contesting.com
Search:                   http://www.contesting.com/km9p/search.htm