[AMPS] Re: zero signal Ia

[gdaught6@leland.Stanford.EDU (George T. Daughters)]

Hi Johan,

> What is a suiteable zero signal Ia current
> for a GS23b (4CX1600u) in AB1 operation.
> I guess my 270mA is a bit too much...

I run my 4cx1600B at Va = 3kV, Vs = 350 V; and adjust Vg for Ia = 
about 0.3 amps.  Your 0.27 sounds fine to me!

73,
 
George T. Daughters, K6GT

--
FAQ on WWW:               http://www.contesting.com/ampsfaq.html
Submissions:              amps@contesting.com
Administrative requests:  amps-REQUEST@contesting.com
Problems:                 owner-amps@contesting.com
Search:                   http://www.contesting.com/km9p/search.htm