Amps
[Top] [All Lists]

[AMPS] SB-220 input circuit

To: <amps@contesting.com>
Subject: [AMPS] SB-220 input circuit
From: realex@flash.net (bob alexander)
Date: Tue, 03 Aug 1999 18:37:48 -0500
> > No, not at all.  What I *do* see is below-normal grid and plate current
> > compared to the lower bands, and commensurately less output.  It's been
> > opined that the problem is not the match to the transceiver, but rather
> > the match from the input network to the tubes.  What say you?

---------------

Replace C-32.  It is open or partially open at 10 meters but works fine
on lower freqs.  That is why there is below normal grid and plate
current with full drive.
73, Bob, W5AH

--
FAQ on WWW:               http://www.contesting.com/ampfaq.html
Submissions:              amps@contesting.com
Administrative requests:  amps-REQUEST@contesting.com
Problems:                 owner-amps@contesting.com
Search:                   http://www.contesting.com/km9p/search.htm


<Prev in Thread] Current Thread [Next in Thread>