>
>> You are right if no ALC is used. My idea assumes 1-10 mA grid current
>> (yes, it is little bit AB2), but ALC reduces driving power from the
>> excitor, resulting total IMD is not so bad. Remember 6146 AB1 GC in KWM-2,
>> same thing.
>
>First, ALC is not that fast. Most rigs can't even keep up with
>themselves, let alone a loop from an external PA.
>
>Second, any grid current will perturb grid voltage unless the grid
>comes from a supply with low esr and good dynamic regulation.
>
>Third, you are locked into cathode drive without complex circuitry.
>
? What is the Mu of the tube, Tom.
>
>73, Tom W8JI
>w8ji@contesting.com
>
>--
>FAQ on WWW: http://www.contesting.com/ampfaq.html
>Submissions: amps@contesting.com
>Administrative requests: amps-REQUEST@contesting.com
>Problems: owner-amps@contesting.com
>Search: http://www.contesting.com/km9p/search.htm
>
Rich...
R. L. Measures, 805-386-3734, AG6K, www.vcnet.com/measures
--
FAQ on WWW: http://www.contesting.com/ampfaq.html
Submissions: amps@contesting.com
Administrative requests: amps-REQUEST@contesting.com
Problems: owner-amps@contesting.com
Search: http://www.contesting.com/km9p/search.htm
|