>TU Rich! I am also thinking about trying neutralization on the amp, Maybe
>using a piece of solid copper from a piece of house romex wire (abt 14 or 12
>gauge I guess?) and running it parallel to one of the tubes abt 1/2 inch
>away??, then to the filament choke and wrap abt 4/5 turns around it in the
>same direction that the choke was wound then to ground??? Does that sound
>abt right?
Beats me. I know of no way to neutralize a grounded-grid amplifier.
>It "takes off" when I key it and turn the tune cap, then the
>grid skies and the plate turns red, even if I un-key it at that time it
>"takes off".
Wow. I would be interested to know the grid resonance and the anode
resonance. Does it take off with the suppressors removed?
later, Phil
Rich...
R. L. Measures, 805-386-3734, AG6K, www.vcnet.com/measures
--
FAQ on WWW: http://www.contesting.com/ampfaq.html
Submissions: amps@contesting.com
Administrative requests: amps-REQUEST@contesting.com
Problems: owner-amps@contesting.com
Search: http://www.contesting.com/km9p/search.htm
|