You just lost me!
John ZS5JF
----------
> From: Peter Chadwick <Peter_Chadwick@mitel.com>
> To: 'Rich Measures' <measures@vc.net>; 'amps' <amps@contesting.com>
> Subject: RE: [AMPS] blocking cap current
To: <amps@contesting.com>
> Date: 21 July 1999 05:59
>
>
> Rich says:
>
> >? Doesn't the half-cycle pulse of DC current come through the HV-RFC, or
> >am I missing something?
>
> Being picky, what is a 'half-cycle pulse of DC current'?
>
> Wherefor the current squared? ( DC is Direct Current, so DC Current is
> Direct Current Current, or Current squared)
>
> The term is nearly as bad as 'IF frequency'.
>
> If it's a half cycle pulse, it can't be DC by definition.
>
> >? Isn't the tank circulating current roughly Q times the anode
> current?
> >With a typical 10m Q or 15, tank circulating current would seem to
> be >the dominant factor.
>
> ???? Only if the majority of circulating current is from anode to ground,
> rather than in the tank tuning cap.
>
> 73
>
> Peter G3RZP
>
>
>
> --
> FAQ on WWW: http://www.contesting.com/ampfaq.html
> Submissions: amps@contesting.com
> Administrative requests: amps-REQUEST@contesting.com
> Problems: owner-amps@contesting.com
> Search: http://www.contesting.com/km9p/search.htm
--
FAQ on WWW: http://www.contesting.com/ampfaq.html
Submissions: amps@contesting.com
Administrative requests: amps-REQUEST@contesting.com
Problems: owner-amps@contesting.com
Search: http://www.contesting.com/km9p/search.htm
|