>I'm going to use one of the 12v control signals available to turn the
>amplifier on and off. In order to do this I need a DPDT relay with a
>low current 12v coil with contacts that can handle 220v' at 20amps.
>I'll put the relay in the 220v line to the amplifier.
>
>Anyone know where I can get one of these?
>
Hi Richard,
I buy all my big relays from W.W. Grainger.
They have stores all over Texas and elsewhere.
I have lots of good relays for your application here, but they
have 24 volt dc coils/20 amp contacts.
GL!
Phil, K5PC
--
FAQ on WWW: http://www.contesting.com/ampfaq.html
Submissions: amps@contesting.com
Administrative requests: amps-REQUEST@contesting.com
Problems: owner-amps@contesting.com
Search: http://www.contesting.com/km9p/search.htm
|