>
>Tom says:
>
>
>>> ? Power transfer is maximal when the resistance of the load equals the
>>> internal of the generator. At this point, efficiency is 50%. However,
>>> in practice amplifiers are c.60% efficient.
>>
>>You've made the common mistake of looking at "pictures in books"
>>and not reading all the text explaining the pictures.
>
>There are at least as many very eminent engineers and academics who disagree
>with Tom as there are those who agree.
? Can you name two eminent engineers who agree with Mr. Rauch on his
contention that AC Circuit Analysis does not apply in determining current
division in a L/R VHF parasite suppressor? .
> Positions are sufficiently entrenched
>that I don't believe either side will convince the other. Personally, I
>can't swallow 'non dissipative' resistance.
? nor do I.
> But I think that all this thread
>will produce is acrimony and discord.
>
which is the engine of interest in every ''soap opera'' and ''novella''
on television in the Amerias.
>
"Where there's smoke there's fire".
On AMPS, without Mr. Rauch, there would undoubtedly be little smoke.
- cheers, Peter. .
Rich...
R. L. Measures, 805-386-3734, AG6K, www.vcnet.com/measures
--
FAQ on WWW: http://www.contesting.com/ampfaq.html
Submissions: amps@contesting.com
Administrative requests: amps-REQUEST@contesting.com
Problems: owner-amps@contesting.com
Search: http://www.contesting.com/km9p/search.htm
|