Hello,
I have built an All-band (excepted warc-band), 2000-Watt-output 8877
linear amplifier.
However, I have a problem with the Plate Choke, which is connected
between the tube and the PI-L ciruit.
I was testing the amplifier on 10M when the ouptut power (around 1KW)
suddenly drop down. I immediatly switch off the amplifier and I could
see that the Plate Choke was extremly hot, at such a point that the
resin was running down the Choke !
There's no need to say that the choke has burned out !
I used a High power manufactured Plate Choke (B&W BBC-5K):
Power Rating 5KW
Maximum DC voltage 5KV
Maximum DC current 2A
None of these characteristics was exceeded (1KW output, 4KV DC under
800mA).
I can't understand the reason of this incident.
Best 73's de F5AVK, Christophe
___________________________________________________________
Do You Yahoo!?
Votre e-mail @yahoo.fr gratuit sur http://courrier.yahoo.fr
--
FAQ on WWW: http://www.contesting.com/ampfaq.html
Submissions: amps@contesting.com
Administrative requests: amps-REQUEST@contesting.com
Problems: owner-amps@contesting.com
Search: http://www.contesting.com/km9p/search.htm
|