Amps
[Top] [All Lists]

[AMPS] Peak reading vs True peak

To: <amps@contesting.com>
Subject: [AMPS] Peak reading vs True peak
From: Peter_Chadwick@mitel.com (Peter Chadwick)
Date: Thu, 24 Jun 1999 15:43:32 +0100
Ah. Different interpretations.

73

Peter G3RZP

> ----------
> From:         Rich Measures[SMTP:measures@vc.net]
> Sent:         24 June 1999 15:40
> To:   Peter Chadwick; 'W8JI@contesting.com'; 'amps'   
> Subject:      RE: [AMPS] Peak reading vs True peak 
> 
> 
> 
> 
> >
> >Tom says:
> >
> >>The tube also draws less current, because HV is less.
> >
> >No. The tube draws maximum current when the plate volts are minimum, and
> the
> >grid the most positive (which may not necessarily be positive with
> respect
> >to cathode). 
> 
> ?  Tom is apparently talking about indicated anode current for a g-g 
> triode, with the same amount of cathode drive, when anode supply volts 
> decrease.  .  .  
> 
> -  cheers
> 
> 
> Rich...
> 
> R. L. Measures, 805-386-3734, AG6K, www.vcnet.com/measures  
> 
> 
> --
> FAQ on WWW:               http://www.contesting.com/ampfaq.html
> Submissions:              amps@contesting.com
> Administrative requests:  amps-REQUEST@contesting.com
> Problems:                 owner-amps@contesting.com
> Search:                   http://www.contesting.com/km9p/search.htm
> 

--
FAQ on WWW:               http://www.contesting.com/ampfaq.html
Submissions:              amps@contesting.com
Administrative requests:  amps-REQUEST@contesting.com
Problems:                 owner-amps@contesting.com
Search:                   http://www.contesting.com/km9p/search.htm


<Prev in Thread] Current Thread [Next in Thread>