re: pc board construction
Jim,
You might contact circuit board specialists in Colorado. They do some
small production runs. I've purchased amateur radio project pc boards
from them in the past and they seem to make a great product.
You could do it yourself without a lot of grief. There's many simple
methods to "roll your own" including hand drawn directly on the blank pc
board.
If you have a pc computer, you can transfer you own design to a gerber
file and pc board layout using the free Protel Software on The AP
Circuits web site. It's actually a high dollar dos pc board layout
program, now available in the public domain.
AP Circuits and many others will allow you to E-mail a gerber package to
them along with the credit card info. Should you meet the basic
requirements, you'll have a completed circuit board in your hands in 3
days, one day if you want to pay the extra.
Small quirks a problems can be fixed via E-mail or a phone call. Their
product is top-notch.
hope that helps
cheers
skipp
[snip]
From: "Jim" <jdc@ieway.com>
Hello to all....I am searching for someone to make small quantities of
single sided circuit boards. The circuit is very small and contains 3
chips
and a few ancillary parts.....
All I have is a hand drawn schematic. Would need someone to do the "art
work" and produce the boards.
All information welcomed
Thanks!
73 Jim W7RY
___________________________________________________________________
You don't need to buy Internet access to use free Internet e-mail.
Get completely free e-mail from Juno at http://www.juno.com/getjuno.html
or call Juno at (800) 654-JUNO [654-5866]
--
FAQ on WWW: http://www.contesting.com/ampfaq.html
Submissions: amps@contesting.com
Administrative requests: amps-REQUEST@contesting.com
Problems: owner-amps@contesting.com
Search: http://www.contesting.com/km9p/search.htm
|