Amps
[Top] [All Lists]

[AMPS] Re: Ferrite Rod for 6M Amp

To: <amps@contesting.com>
Subject: [AMPS] Re: Ferrite Rod for 6M Amp
From: Peter_Chadwick@mitel.com (Peter Chadwick)
Date: Wed, 2 Jun 1999 09:33:35 +0100
> Mike says:
> 
> >then IMD will not occur, only even order cross modulation which
> >isn't relevant in narrow band RF applications 
> 
> 
> Even order distortion cannot cause cross modulation. The mathematics is
> fairly straightforward, but for me, exhausting, because I'm not good at
> math.
> Cross modulation requires an odd order term. Even order distortion
> produces harmonics, and even order IMD products. In mixers, it also
> produces the 'half IF' spurious response, where a strong unwnated signal
> that produces a signal of half the IF gives a response. This is also
> occsaionally referred to as 'repeat spot frequency responses'.
> 
> 73
> 
> Peter G3RZP
> 
> 

--
FAQ on WWW:               http://www.contesting.com/ampfaq.html
Submissions:              amps@contesting.com
Administrative requests:  amps-REQUEST@contesting.com
Problems:                 owner-amps@contesting.com
Search:                   http://www.contesting.com/km9p/search.htm


<Prev in Thread] Current Thread [Next in Thread>