Amps
[Top] [All Lists]

[AMPS] PWR SUPPLY CAPS

To: <amps@contesting.com>
Subject: [AMPS] PWR SUPPLY CAPS
From: jerry@k9gd.com (Jerry K9GD)
Date: Sat, 08 May 1999 18:17:18 -0500
Greetings:
Can anyone give me a line on getting replacement capacitors for the Kenwood
TL-922.  I am attempting to get caps that are close to 4 inches long and
about 1.32 inches in diameter.  The originals are 200mfd at 500v.  I spoke
to Richard Measures and he suggested that 450v hi temp caps would be OK.
My problem is the size.  Could it be someone out there has 8 of those they
are using for a paperweight...or could it be someone replaced theirs and
has a source.

Thank you in advance.  
jerry k9gd
mailto:jerry@k9gd.com

__________________________________________________________
mailto:Jerry@k9gd.com
homepage:  www.k9gd.com


--
FAQ on WWW:               http://www.contesting.com/ampfaq.html
Submissions:              amps@contesting.com
Administrative requests:  amps-REQUEST@contesting.com
Problems:                 owner-amps@contesting.com
Search:                   http://www.contesting.com/km9p/search.htm


<Prev in Thread] Current Thread [Next in Thread>