> On Mon, 29 Mar 1999 16:05:06 -0800 "Radiodan W7RF" <RFpower@radiodan.com>
> writes:
> >
> >One thing I left out was that the new inverted vee cut for 3650 KHz
> >would be
> >coax fed.
>
> Cut one for 3550 and the other for 3800. Run at as close to right angles
> as you can and fed with one coax. You can run a 160M inv Vee down the
> middle with negligible interaction.
> Figure W VSWR curve on 80/75 and not exceeding 2:1 over most of the
> band.
>
> Coax feed and no tuner is the only way to go IMHO.....
>
> 73 Carl KM1H
That's a good suggestion. I have room for the four legs for 80/75M.
I am used to doing that with different bands at right angles. I will try
that configuration. I don't have the room for the 160M dipole so I will
continue to use the shunt fed tower.
Tnx.
73, Dan Magro W7RF, (President WARC 1999, member SCDXC, SCCC)
Manufacturers Rep & Distributor for HENRY RF Power Amplifiers.
www.radiodan.com <http://www.radiodan.com> ??? RFpower@radiodan.com
<mailto:RFpower@radiodan.com> A trip to our web site is worth the click!
--
FAQ on WWW: http://www.contesting.com/ampfaq.html
Submissions: amps@contesting.com
Administrative requests: amps-REQUEST@contesting.com
Problems: owner-amps@contesting.com
Search: http://www.contesting.com/km9p/search.htm
|