At 09:55 PM 3/1/99 +0000, George McCrary wrote:
>
>Hello Folks,
>
> Has anyone determined if the Nichicon 470 uF at 450v caps that
>All Electronics is selling are suitable for use in amp power supply
>design? I have the Nichicon Catalog and can look up the specs, but how
>can I determine their suitability? I want to build a 4000 volt 750 mA
>supply using 10 of these in series. All Electronics is selling them
>for $3 each or 10 for $22.50 which makes them very attractive.
>
> I would also welcome other suggestions for a source of caps
>for the power supply.
>
> Regards,
>
> George (KQ4QM)
>
I downloaded the datasheet from Nichicons website, and have it here in PDF
format. I can send it to anyone interested as an email attachment.
Unfortunately they do not show an actual value for ripple current.
73
Warren - K2BM
=============================================================
Warren J. Walsh (warrenw@pentek.com) Pentek, Inc.
Design Engineer One Park Way
Phone: (201) 818-5900 x 251 Upper Saddle River, N.J.
Fax: (201) 818-5941 http://www.pentek.com/
=============================================================
--
FAQ on WWW: http://www.contesting.com/ampfaq.html
Submissions: amps@contesting.com
Administrative requests: amps-REQUEST@contesting.com
Problems: owner-amps@contesting.com
Search: http://www.contesting.com/km9p/search.htm
|