>
>Rich,
>
>Cured polyester resin.
>
? surprising. What temp for the epoxy?
- I wound a transformer 21 years ago which I potted in polyester
laminating resin. So far, no problems.
- thanks, Len
>
>
>
>At 12:07 PM 3/1/99 -0800, Rich Measures wrote:
>>>
>>>Hello again:
>>>
>>>I've done a little homework and found that the polyester resin from Evercoat
>>>and carried at Home Depot will start to degrade at 150 degrees F (66 C).
>>
>>? cured polyester resin or uncured?
>>thanks, Len
>>
>>
>>Rich...
>>
>>R. L. Measures, 805-386-3734, AG6K, www.vcnet.com/measures
>>
>>
>>
>
>
>
>
>--
>FAQ on WWW: http://www.contesting.com/ampfaq.html
>Submissions: amps@contesting.com
>Administrative requests: amps-REQUEST@contesting.com
>Problems: owner-amps@contesting.com
>Search: http://www.contesting.com/km9p/search.htm
>
Rich...
R. L. Measures, 805-386-3734, AG6K, www.vcnet.com/measures
--
FAQ on WWW: http://www.contesting.com/ampfaq.html
Submissions: amps@contesting.com
Administrative requests: amps-REQUEST@contesting.com
Problems: owner-amps@contesting.com
Search: http://www.contesting.com/km9p/search.htm
|