Amps
[Top] [All Lists]
<prev [Date] next>
[Advanced]
 <prev [Thread] next>

[AMPS] Screen regulator circuit needed

from [Ian White, G3SEK] [Permanent Link][Original]
To: <amps@contesting.com>
Subject: [AMPS] Screen regulator circuit needed
From: G3SEK@ifwtech.demon.co.uk (Ian White, G3SEK)
Date: Thu, 19 Nov 1998 09:49:01 +0000 
John Nelson wrote:
>For the record, the Zeners used to derive the comparison data illustrated
>on Ian's web site were 
...

For the record, the URL is: 
http://www.ifwtech.demon.co.uk/g3sek/cleansig/imd1.htm

Most of the details you're asking John for are there, Rich.

73 from Ian G3SEK          Editor, 'The VHF/UHF DX Book'
                          'In Practice' columnist for RadCom (RSGB)
                           http://www.ifwtech.demon.co.uk/g3sek

--
FAQ on WWW:               http://www.contesting.com/ampfaq.html
Submissions:              amps@contesting.com
Administrative requests:  amps-REQUEST@contesting.com
Problems:                 owner-amps@contesting.com
Search:                   http://www.contesting.com/km9p/search.htm
[More with this subject...]
<Prev in Thread] Current Thread [Next in Thread>
Previous by Date:  [AMPS] 3-500Z on 50MHz, Mike Willis
Next by Date:  [AMPS] 3-500Z on 50MHz, Rich Measures
Previous by Thread:  [AMPS] Screen regulator circuit needed, John Nelson
Next by Thread:  [AMPS] Screen regulator circuit needed, Rich Measures
Indexes:  [Date] [Thread] [Top] [All Lists]