Amps
[Top] [All Lists]

[AMPS] G2DAF

To: <amps@contesting.com>
Subject: [AMPS] G2DAF
From: measures@vc.net (Rich Measures)
Date: Mon, 2 Nov 1998 14:24:22 -0800
>
>Why not use a storage spectrum analyzer to look at occupied bandwidth and
>IM over a significant time period while modulating with speech or pulsed
>white noise?  Wouldn't that be a better worst-case test?
>
RE:  pulsed noise:  Only if the pulses are spaced far enough apart to 
cause the screen potential to decay to near zero volts between pulses.
RE:  speech modulation:  I have listened with stereo headphones using two 
double-filter receivers.  The total IMD in the window above or below the 
DAF amps. was no better than 23db down.  However, this is perfectly legal 
as long as the rotten splatter does not go outside of the ham band.  
-  -  There ain't no such thing as a 200mpg carburetor for a 1969 Dodge 
V8.  
-  later, Gary.



Rich...

R. L. Measures, 805-386-3734, AG6K, www.vcnet.com/measures  


--
FAQ on WWW:               http://www.contesting.com/ampfaq.html
Submissions:              amps@contesting.com
Administrative requests:  amps-REQUEST@contesting.com
Problems:                 owner-amps@contesting.com
Search:                   http://www.contesting.com/km9p/search.htm


<Prev in Thread] Current Thread [Next in Thread>