Amps
[Top] [All Lists]

[AMPS] Re: Alpha PA-70V

To: <amps@contesting.com>
Subject: [AMPS] Re: Alpha PA-70V
From: measures@vc.net (Rich Measures)
Date: Wed, 12 Aug 98 23:11:58 -0800
>Update:
>
>Econco in Woodland, CA ( http://www.econco.com/ ) will rebuild this tube for
>$590.00, but they warned me that their "yield" rate on this tube is only
>50%.  Apparently, only half of these tubes sent in are worthy of the rebuild
>process.  Have any idea why?  I was only able to speak to their
>sales/marketing rep.
>
?  not worthy makes little sense.  The inside of one is like a 3cx1000A7, for 
which they can replace the grid and filament if need be.  If you send a dud in 
to Econco for a rebuild, and they tell you it is scrap, make sure you get the 
same serial number 3cv1500 back  Next step is to try Freeland Products.  
(Econco scammed me on a 4cx3000a I sent in testing.)  //   A friend sent an 
8171 to Econco for evaluation.  They said it had low emission and needed to be 
rebuilt.  He was skeptical because he knew something about the history of the 
tube.  A few months later he sent it in with a batch of other tubes.  This time 
the emission was said to be normal.  
-  later, Paul.  


Rich...

R. L. Measures, 805-386-3734, AG6K, www.vcnet.com/measures  


--
FAQ on WWW:               http://www.contesting.com/ampfaq.html
Submissions:              amps@contesting.com
Administrative requests:  amps-REQUEST@contesting.com
Problems:                 owner-amps@contesting.com
Search:                   http://www.contesting.com/km9p/search.htm


<Prev in Thread] Current Thread [Next in Thread>
  • [AMPS] Re: Alpha PA-70V, Rich Measures <=