Amps
[Top] [All Lists]

[AMPS] 8877 power supply???

To: <amps@contesting.com>
Subject: [AMPS] 8877 power supply???
From: measures@vc.net (Rich Measures)
Date: Sun, 7 Jun 98 05:54:19 -0800
>Thinking about a 2m w6po amp here using a 8877 in it. Question, 
>is there a power supply such as a L4B that I might can find used that
>will run it at full output ok, 

Full output for RTTY or FM has a roughly 4x higher transformer-VA 
requirement than  full output on SSB.  Another consideration:  for SSB, 
one can get by with a simple capacitor-type DC filter, while for 
semi-continuous duty modes like FM and RTTY, a resonant-choke filter is 
indicated.  

>or am I going to have to build one. Also
>looks like the less drive you have the more B+ voltage is required for
>full output. 

yes

>Have about 37 watts of drive here. How much B+ should I
>need and what is considered best on a 8877. 2600,2800 or ???
>-- 
My guess is that with 37w of drive you would need c. 4kV.  The rated 
drive for full ratings (4kV@1a) is 70-plus watts.  
>
>73's
>Robert E. Dodson
>mailto:wb5apd@stc.net
>WB5APD/EM84AK 



Rich...

R. L. Measures, 805-386-3734, AG6K, www.vcnet.com/measures  


--
FAQ on WWW:               http://www.contesting.com/ampfaq.html
Submissions:              amps@contesting.com
Administrative requests:  amps-REQUEST@contesting.com
Problems:                 owner-amps@contesting.com
Search:                   http://www.contesting.com/km9p/search.htm

<Prev in Thread] Current Thread [Next in Thread>