Amps
[Top] [All Lists]

[AMPS] Solid State 1kw amp

To: <amps@contesting.com>
Subject: [AMPS] Solid State 1kw amp
From: amps@txrx.demon.co.uk (Steve Thompson)
Date: Tue, 2 Jun 1998 21:06:34 +0100
In message <006701bd8e5b$76709620$7118a309@dperson.charlotte.ibm.com>,
Doug Person <ki6bq@ibm.net> writes
>Hi Dave:
>
>A while back I had a solid-state amp with a brand name of TransWorld.  I'm
>not sure what it was rated at but I could get 1000 watts PEP out on 40
>meters and 750 to 800 on 20.  Sorry I let it go.  It was a commercial unit
>and the manufacturer is out in California somewhere.  It consisted of 4
>internal modules of 2 MRF-150's (or similar) combined together at the
>output.  I think a schematic of their amp might be something worth
>eyeballing for your project.
>
>73, Doug -- W4DXV
>

There is a Motorola application note by Helge Granberg describing such
an amp. (sorry, not in the office to look up the number) - CCI might do
some of the parts in kit form.


Steve

--
FAQ on WWW:               http://www.contesting.com/ampfaq.html
Submissions:              amps@contesting.com
Administrative requests:  amps-REQUEST@contesting.com
Problems:                 owner-amps@contesting.com
Search:                   http://www.contesting.com/km9p/search.htm

<Prev in Thread] Current Thread [Next in Thread>