Rich Measures wrote:
> My guess is that when a new Tune C is installed, or
>when new plates are installed, the intermittent arcing problem will not
>go away.
That's probably true. Replacing the plates is probably necessary, but
it's only treating a symptom. It isn't treating the root cause.
Something, somewhere changed from the way it was before. That's what
made the arcing start, and that's what you still need to find.
73 from Ian G3SEK Editor, 'The VHF/UHF DX Book'
'In Practice' columnist for RadCom (RSGB)
http://www.ifwtech.demon.co.uk/g3sek
--
FAQ on WWW: http://www.contesting.com/ampfaq.html
Submissions: amps@contesting.com
Administrative requests: amps-REQUEST@contesting.com
Problems: owner-amps@contesting.com
Search: http://www.contesting.com/km9p/search.htm
|