| To: | <amps@contesting.com> |
|---|---|
| Subject: | [AMPS] Capacitor Identification |
| From: | wc7m@vcn.com (W7CW Jay E Ostrem) |
| Date: | Sat, 28 Mar 1998 00:53:06 +0000 |
I've got two ceramic doorknob caps that a friend gave me, stating they
would make good blocker capacitors. They are both 7/8 inch thick, 2 3/8
inch diameter, white in color, with threaded holes for screws. Both are
same manufacturer, The "M" has a circle around it.
482Z
M20KV
709A
482Z
M20KV
809A
Any help would be appreciated.
73 Jay W7CW
1AB Ranch
Gillette, Wyoming
--
FAQ on WWW: http://www.contesting.com/ampfaq.html
Submissions: amps@contesting.com
Administrative requests: amps-REQUEST@contesting.com
Problems: owner-amps@contesting.com
Search: http://www.contesting.com/km9p/search.htm
|
| <Prev in Thread] | Current Thread | [Next in Thread> |
|---|---|---|
| ||
| Previous by Date: | [AMPS] Plate RFC choke design, Richard W. Ehrhorn |
|---|---|
| Next by Date: | [AMPS] Plate RFC choke design, Rich Measures |
| Previous by Thread: | [AMPS] Source for Bird wattmeters/slugs, Bill Cotter |
| Next by Thread: | [AMPS] Capacitor Identification, David E Sinclair |
| Indexes: | [Date] [Thread] [Top] [All Lists] |