Amps
[Top] [All Lists]

[AMPS] Re: Hygain/Telex Amateur phasing report

To: <amps@contesting.com>
Subject: [AMPS] Re: Hygain/Telex Amateur phasing report
From: thompson@mindspring.com (David L. Thompson)
Date: Sun, 22 Feb 1998 13:56:30 -0500 (EST)
About a dozen of you asked about the Hy-Gain Telex Amateur Phasing
Engineering Report Hy-Gain Part # 801774.  Here is some additional info:

Hy-Gain has a web page at
ourworld.compuserve.com/homepages/hygain/homepage.htm (there is no www in
this web address).

Phone (sales 402-465-7038)

e-mail (per web)  K7LXC probably has another address or two also)
ie hygain@telex.com

Use the Nebraska address.

The phasing of three verticals gives a 60 degree pattern width and 4.5 db
gain over a single vertical (not dbi or dbd).  Approaches a four square with
less hardware and space required.  WX0B and Comtek probably have the switch
boxes and the coax phasing lines to help speed construction.  

The nice thing about these systems is you can substitute your
vertical..hy-tower, 18AVT/WB, Uni-Hat, homebrew, Gladiator etc etc etc...

Dave K4JRB


--
FAQ on WWW:               http://www.contesting.com/ampfaq.html
Submissions:              amps@contesting.com
Administrative requests:  amps-REQUEST@contesting.com
Problems:                 owner-amps@contesting.com
Search:                   http://www.contesting.com/km9p/search.htm

<Prev in Thread] Current Thread [Next in Thread>