This does not sound like a good idea.
When linear design went to single ended finals with
pi-coupled output, the main reason was improved harmonic
suppression, and coupling to coax feedlines.
I have tried a link coupled amplifier on 6m and the harmonics
were horrendous.
I have found that a pair of coaxial stubs (open and closed)
fitted between the pi-circuit and the antenna relay to be very
effective in eliminating the 200MHz fourth harmonic.
I could dig up the measurements of it is of any help.
B&W sell a 6M low-pass filter with a cut-off at 60 MHz. This
is only good for 1500W.
Regards,
Martin ZL1ANJ
--
FAQ on WWW: http://www.contesting.com/ampfaq.html
Submissions: amps@contesting.com
Administrative requests: amps-REQUEST@contesting.com
Problems: owner-amps@contesting.com
Search: http://www.contesting.com/km9p/search.htm
|