>Don't know how many will agree with me, but for years I have used
>automotive ignition wire for my HV stuff. I use the 7 or 8 MM SOLID core
>wire. Years ago I bought a 100 foot spool and am still using it.
Belden makes high quality silicon rubber insulated, 7mm, stranded copper
ignition wire that is sold at auto supply stores.
>It's good for 30 or 40 KV or some high number. Obviously, still use every
>safety precaution you can think of.
>
>Works well with the Millen HV connectors recently mentioned here on the
>reflector.
>
I would give the Millen HV connectors the match test since some ot them
are made from phenolic -- which is a hygroscopic material. Real HV
connectors would be better. Carl suggested: Alden Products in Brocton,
Ma. Ask for a catalog at 508-583-0160
Rich...
R. L. Measures, 805-386-3734, AG6K
--
FAQ on WWW: http://www.contesting.com/ampfaq.html
Submissions: amps@contesting.com
Administrative requests: amps-REQUEST@contesting.com
Problems: owner-amps@contesting.com
Search: http://www.contesting.com/km9p/search.htm
|