Amps
[Top] [All Lists]

[AMPS] parasitic suppressors

To: <amps@contesting.com>
Subject: [AMPS] parasitic suppressors
From: measures@vc.net (Rich Measures)
Date: Mon, 8 Dec 97 10:38:54 -0800
>Rich has said on a number of occasions, and, I believe, without
>contradiction, that it is well worthwhile measuring the value of
>parasitic suppressor resistors after a flashover. My question is:-
>
>Do the values change because of long term over heating, which would
>possibly show up in surface colour change?

When a carbon-composition resistor is overheated, visable signs tend to 
appear in the phenolic covering -- and the resistance slowly increases.  
When a MOF resistor is overheated, the color in the coating tends to fade 
-- and the resistance slowly decreases.   
>
>OR
>
>Is there an enormous pulse overload causing the value change? If so, why
>is there no apparent visual colour change - or is there? Does it depend
>on the resistor type?

There is apparently no colour change during a vhf parasitic osc.  
Typically, the event appears to be so brief that, short of an explosion, 
the heat does not have enough time to reach the surface.  
>
>If we assume that Rich is correct with the parasitic theory, then it
>suggests that the suppressors do get a large power input during the
>parasitic oscillation duration. If the change is due to long term
>heating merely because of the RF power dissipated from the plate current
>flow dividing between the resistor and the shunt inductor, then the
>change should be similar to that which would appear from heating the
>resistors with DC.

The footprints are different enough to enable one to tell them apart.  
cheers
Rich...

R. L. Measures, 805-386-3734, AG6K   


--
FAQ on WWW:               http://www.contesting.com/ampfaq.html
Submissions:              amps@contesting.com
Administrative requests:  amps-REQUEST@contesting.com
Problems:                 owner-amps@contesting.com
Search:                   http://www.contesting.com/km9p/search.htm

<Prev in Thread] Current Thread [Next in Thread>