Hello All,
I will be using my TS930s to drive an SB220 I recently purchased and
will be receiving in a few days.
The TS930s has an the internal relay intended to operate an amps T/R
relay. One side of the NO relay contacts is grounded to the TS 930 and
the other side is brought out to a DIN connector for the amp.
I do not know the SB220's relay drive requirment except that I believe
you ground the low side of a relay whose high side is at approx 120
volts. Likewise the manual for the TS 930 does not state its relays
capabilities nor the capability of the wiring at the Din connector.
Assuming all parts and connections are as designed, is the relay, wiring
and connector in the TS930 compatable with the TR circuits of the
SB220.
Thanks in advance.
Len
--
FAQ on WWW: http://www.contesting.com/ampfaq.html
Submissions: amps@contesting.com
Administrative requests: amps-REQUEST@contesting.com
Problems: owner-amps@contesting.com
Search: http://www.contesting.com/km9p/search.htm
|