> at 10:00 PM 10/16/97 -0700, you wrote:
>>I question the resoning on a high value such as the 50ohm 50 Watt
>>resistor in their amp. Seems a little off to me.
>>
>>Comments?
>>
>
>That is Svetlana's recommended value for that tube.
Which tube, Phil?
>You never want this resistor to open during an event.
good point -- or sustain any type of damage.
>10 ohms is ok up to about 3 kv. I am running 20 ohms
>on my Alpha 77SX with good results.
>
Does 'good results' mean that you shorted the anode supply and the 20
ohm glitch resistor was able to handle the resulting current without
sustaining damage?
thanks
Rich---
R. L. Measures, 805-386-3734, AG6K
--
FAQ on WWW: http://www.contesting.com/ampfaq.html
Submissions: amps@contesting.com
Administrative requests: amps-REQUEST@contesting.com
Problems: owner-amps@contesting.com
Search: http://www.contesting.com/km9p/search.htm
|